ArcadeCab- MAME Cabinet Plans 2: List of Plywood Boards


Cabinet Dimensions


Cutting parts layout (courtesy of Snowowl)

Cabinet Plans 2: List of Plywood Boards

List of Plywood Boards
I have listed all the plywood boards required to build the cabinet. Each board is linked to the page it is used on, to make your life a little easier. I did not list the ledgers as it is not that critical to have them be exactly the same as mine. Besides, they are listed on a single page already.

A PDF document showing how these boards can be cut from the three sheets of plywood has been provided by Tim ("Snowowl").

Plywood Boards	Dimensions
Side Panel [2]	See Page
Base	20-3/4"w x 30-15/16"
Caster strips	4" w x 30-15/16"
Monitor Shelf	20"w x 14-1/2"
Speaker Area	20"w x 11-1/4"	30° beveled
Upper Rear	20"w x 22-1/8"	40° and 35° bevels
Back	20"w x 31"
Top	20"w x 7-15/16"
Front strip	20"w x 1"
Drawer Base	19-1/4"w x 16"
Drawer Front	19-7/8"w x 3-1/4"
Door	19-3/4"w x 30-3/4"

Table of Contents
Background
Tools
Materials
Cutting Side One
Cutting Side Two
Dado for the Base
Building the Base
Monitor Shelf
Ledger Boards Speaker Area- Start
Upper rear
Back
Top
Drawer
Door
Speaker Area- Cuts
Painting
Assembly
Marquee
Monitor Bezel
List of Boards

Control Panel Part 1
Control Panel Part 2
Wiring the CP
Attaching the CP
Finishing Touches
Software
Final Thoughts

<<<-Monitor Bezel

Control Panel Intro->>>